How to migrate from WPO X5 to X6
Many people seem to have difficulties when migrating from X5 to X6, if they want also to transfer their personal settings from X5 to X6.
The procedure described below is not difficult, but it may take you about an hour or so. The reward is, that you in the end you will have your old environment functioning again as if you didn't change a thing.
The procedure described is valid if you have no other Corel products running than WPO only. If, for instance, if you also have Corel Draw installed on your machine, the procedure is somewhat more complicated, though not fundamentally different. The procedure described is for XP. For Vista and Windows 7 the file locations may be different. It is assumed that windows is installed on your C-disk.
Take about an hour for the whole thing. Take the following steps:
1. Make an image of your C-disk with a program like Macrium Reflect (free), Norton Ghost or similar. This is just a safety measure, enabling you to restore the whole old thing with a working X5 suite if you might run into difficulties. If you are sure what you are doing you may skip this step, but I would strongly advise you to not omit this.
2. Open WordPerfect X5, right click on one of the toolbars and choose "settings" in the appearing menu. Read the template file, which should be something like WP15.US. Remember this name, or write it down. The same for the toolbars and property bars that you activated. Also make notes of all your settings in the Tools/Settings dialogs. This is some work.
3. Go to C:\Documents and settings\Your name\Application data, where "Your name" is the folder with your personal settings. Here you will find a folder called "Corel". Make a copy of this folder and store it in a safe place, preferably on an other partition on the same computer.
4. Now in the copy you made of this folder rename all subfolders and files containing "15" to "16" and similarly if they contain X5 make it X6. As an example, there is a folder called "WordPerfect Office X5" rename it to "WordPerfect Office X6" and if there is a file xx15yyyyy.zzz then rename it to xx16yyyyy.zzz. This sort of batch renaming is the easiest if you know how to do that in MSDOS, or even better in 4DOS or in Take Command. A renaming program such as "Rename Master" (free) might also do the job. Otherwise you will have to do all the renaming in Windows Explorer by hand. Be sure that no file or folder is left with 15 or X5 in its name. This is absolutely essential.
5. Now deinstall the WP X5 suite and the concomitant iFilter from "Add or remove programs" that you can find in your control panel. Do NOT allow the deinstaller to keep your personal file and program settings. If there are any shortcuts left on your desktop or elsewhere, remove them manually.
6. Remove from your C-disk all folders with the name Corel (different when you have other Corel products installede) or WordPerfect. This is an essential step.
8. Although this is not an essential step, it is a good idea to now clean your registry from Corel remnants. A good way to do this is by a registry cleaning program like Eusing Registry Cleaner or RegSeeker or (even better) by using them both. Both are free for personal use, and are easy to find on the Internet. With RegEdit (to be found under C:\Windows\regedit.exe) manually remove the folders HKLM\Software\Corel and HKCU\Software\Corel. If you have other Corel programs installed this is more complicated and should not be done this way. With RegSeeker you can easily remove other occurrences of Corel and WordPerfect from your registry. If you have no other office suite installed on your machine, you can safely remove all registry keys that contain references to Corel products. If you do have another Office program installed, you must keep the keys that refer to converting and/or importing WPO-files.
If you do not feel safe with this all, omit these steps. However running Eusing Registry Cleaner and letting Eusing clean your registry from all keys it suggests is a safe procedure.
9. Again reboot.
10. Now install and activate your WordPerfect Office X6. Activation is essential.
11. Go to C:\Documents and settings\Your name\Application data and delete the folder named Corel that you find there, and replace it with the folder you edited as described under point 3 above. In fact you now have all your information for the restoration of your old configuration transferred, however a few things are stored in the registry, and therefore must be reset in the program. For WordPerfect a few of those are described below. For Quattro Pro and for Presentations similar steps are required.
12. Open WP X6 and choose your default language in Tools/Language/settings and restart WP.
13. Right click on one of the toolbars and choose "settings" in the appearing menu. It should state that the template is something like wp16US. This should be the same file as mentioned under point 2, but there it was called wp15US. You renamed it under step 3. Activate the same toolbars en property bar that you had active under WP X5, and that you wrote down under point 2. Place the bars on your screen where you want them. You should now have your old WP desktop back.
14. Go to Tools/Proofread and activate what you want.
15. Go to Tools/QuickWords or QuickCorrect and select Format as you go. Take the same settings you had under X5. Also for Smart quotes.
16. Go to Tools/settings and make the necessary adjustments under all tabs. Here for example you have to restate you default folders, and some other things that steer the behavior of WP.
This should be it. Again, it is not really a straightforward thing, but it is a lot less work than redoing everything from scratch. It is definitely worth the effort.
This information is given as is, and the author cannot be held responsible for any problems that may follow on the application of the method described above.